SPM-sequential-microdispenser-OEM-microfluidics

OEM SPM Sequential Microdispenser

The all-in-one sample manipulator that handles delicate samples with great precision

the SPM Sequential microdispenser is an OEM microfluidic syringe pump designed for industrial microfluidic integration projects with a high-precision dosing and liquid handling system. Our microdispenser can dilute samples or reagents in the range of milliliter down to nanoliter, aspirate or dispense liquids, control the flow rate, prepare complex mixes, or alternate air, liquid samples.

This is an OEM product. It can be tailored for the needs of your instrument.

Brochure OEM

Valve design
Syringe design
	Clear selection

Add to quote

SKU: N/A Category: Microfluidic devices Tag: SPM

Description

Wide range of microfluidic distribution valve designed for reduced and exceptionally low internal volume

microfluidic-distribution-valve-rotation

Custom distribution valves from 6 ports to 12 ports integrated in the microdispenser

Reduced volumes and reagent consumption thanks to the low internal volume of our microfluidic valves integrated in the microdispenser designed with small diameter channels
Low carryover volume allowing fast liquid switching, reagent and money savings thanks to our unique microfluidic valves’ geometry design
Minimal liquid contamination and no dead volume, thanks to AMF high manufacturing quality standards. The components of the microdispenser are made in house with Swiss quality standards which includes a precise microscopic final inspection.
Standard fluidic connections
Wetted materials in PTFE, designed for high chemical and biological sample compatibility or in UHMW-PE, a very tough material, with the highest impact strength of any thermoplastic

Integrated Microfluidic syringe from 25µl to 1000µl capacity:

free-bubble-priming-syringe-micropump-amf

High dilution ratio: when rinsing, diluting, or switching liquid, our minimal carryover volume leads to a maximal dilution ratio with the diluent in the syringe
Bubble free priming: our unique valve design expels the air from the syringe and valve immediately, eliminating the traditional cumbersome priming procedure
Syringe integrated in the microdispenser are made in borosilicate glass, and the plunger is available in PTFE or UHMW-PE, materials designed for high compatibility to most chemicals and biological samples.

Additional information

Valve design	6-port Distribution Valve – 0.5mm 2 stages ultra-low volume : V-D-2-6-050-C-P, 6-port distribution – 0.5mm PCTFE, PTFE : V-D-1-6-050-C-P, 8-port distribution – 0.5mm PCTFE, PTFE : V-D-1-8-050-C-P, 8-port distribution – 1mm PCTFE, PTFE : V-D-1-8-100-C-P, 10-port Distribution Valve – 0.5mm PCTFE, UHMW-P : V-D-1-10-050-C-U), 10-port Distribution Valve – 1mm PCTFE, UHMW-P : V-D-1-10-100-C-U), 12-port Distribution Valve – 0.50 mm PCTFE, UHMW-PE : V-D-1-12-050-C-U, 12-port Distribution Valve -0.50 mm PCTFE, PTFE : V-D-1-12-050-C-P, 12-port Distribution Valve -0.80 mm PCTFE, UHMW-PE : V-D-1-12-080-C-U, Switch Valve – 6-port 0.5 mm PCTFE,PTFE : V-S-1-6-050-C-P, Switch Valve – 4-port 0.5 mm PCTFE,PTFE : V-S-1-4-050-C-P, On/Off Valve – 0.50 mm PCTFE,PTFE: V-O-1-2-050-C-P, On/Off Valve – 0.75 mm PCTFE,PTFE: V-O-1-2-075-C-P, On/Off Valve – 0.75 mm PTFE,PTFE: V-O-1-2-075-P-P, On/Off Valve – 4 stages 0.50mm PCTFE,PTFE : V-O-4-2-050-C-P
Syringe design	25 µl – Barrel in borosilicate glass – Plunger in PTFE, 50 µl – Barrel in borosilicate glass – Plunger in PTFE, 100 µl – Barrel in borosilicate glass – Plunger in PTFE, 100 ul – Barrel in borosilicate glass – Plunger in UHMW-PE, 250 µl – Barrel in borosilicate glass – Plunger in PTFE, 500 µl – Barrel in borosilicate glass – plunger in PTFE, 500 µl – Barrel in quartz – plunger in PTFE, 500 µl – Barrel in borosilicate glass – Plunger in UHMW-PE, 1000 µl – Barrel in borosilicate glass – Plunger in PTFE

Valve design

6-port Distribution Valve – 0.5mm 2 stages ultra-low volume : V-D-2-6-050-C-P, 6-port distribution – 0.5mm PCTFE, PTFE : V-D-1-6-050-C-P, 8-port distribution – 0.5mm PCTFE, PTFE : V-D-1-8-050-C-P, 8-port distribution – 1mm PCTFE, PTFE : V-D-1-8-100-C-P, 10-port Distribution Valve – 0.5mm PCTFE, UHMW-P : V-D-1-10-050-C-U), 10-port Distribution Valve – 1mm PCTFE, UHMW-P : V-D-1-10-100-C-U), 12-port Distribution Valve – 0.50 mm PCTFE, UHMW-PE : V-D-1-12-050-C-U, 12-port Distribution Valve -0.50 mm PCTFE, PTFE : V-D-1-12-050-C-P, 12-port Distribution Valve -0.80 mm PCTFE, UHMW-PE : V-D-1-12-080-C-U, Switch Valve – 6-port 0.5 mm PCTFE,PTFE : V-S-1-6-050-C-P, Switch Valve – 4-port 0.5 mm PCTFE,PTFE : V-S-1-4-050-C-P, On/Off Valve – 0.50 mm PCTFE,PTFE: V-O-1-2-050-C-P, On/Off Valve – 0.75 mm PCTFE,PTFE: V-O-1-2-075-C-P, On/Off Valve – 0.75 mm PTFE,PTFE: V-O-1-2-075-P-P, On/Off Valve – 4 stages 0.50mm PCTFE,PTFE : V-O-4-2-050-C-P

Syringe design

25 µl – Barrel in borosilicate glass – Plunger in PTFE, 50 µl – Barrel in borosilicate glass – Plunger in PTFE, 100 µl – Barrel in borosilicate glass – Plunger in PTFE, 100 ul – Barrel in borosilicate glass – Plunger in UHMW-PE, 250 µl – Barrel in borosilicate glass – Plunger in PTFE, 500 µl – Barrel in borosilicate glass – plunger in PTFE, 500 µl – Barrel in quartz – plunger in PTFE, 500 µl – Barrel in borosilicate glass – Plunger in UHMW-PE, 1000 µl – Barrel in borosilicate glass – Plunger in PTFE

Application and technical notes

>> Microfluidic samples preparation

Samples preparation for online liquid analysis with chemical reaction.

>> Microfluidic Flow Cytometry

Microfluidic flow cytometry application for bacteria online monitoring in drinking water using BactoSense technology

Specifications

Description	Specification
Operating temperature	15-40°C (41-104°F)
Operating humidity	20-80% non condensing
Max. pressure	7 bars (102 psi)
Wetted materials	PTFE or UHMW-PE, PCTFE and borosilicate glass
Dead volume	None
Carryover volume	Down to 1.5 μL (configuration dependent)
Plunger travel	30 mm with 96'000 micro-steps for nearly pulseless flow
Plunger resolution	Selectable 3'000 steps (standard) / 24'000 steps (high)
Plunger drive	Screw drive with linear encoder for step loss detection
Valves configuration	Zero dead-volume multi-port distribution with angular encoder
Tube port fittings	Standard 1/4-28 UNF, flat-bottom
Cross-contamination	Typically from 1/100 to 1/1000 per cleaning cycle
Accuracy	< 1% deviation from expected value at full stroke
Electrical interface	USB mini, 9-pin D-Sub (other upon request)
Communication type	Serial I2C (other upon request)
Power	18-24 VDC, 2.2 A peak, 40 W (18 VDC optimised for battery use)
Time for full stroke	2 - 3'000 seconds
Dimensions	199.7 x 126.3 x 50.5 mm
Weight	1.5 kg

6-Port Distribution Valve

	Ref. V-D-1-6-050-C-P	Ref. V-D-2-6-050-C-P
Number of stage	1	2
Number of ports	6	6
Wetted materials	PCTFE,PTFE	PCTFE,PTFE
Internal volume	3,5 µL	5,2 µL
Carryover volume	2,6 µL	1,5 µL
Channel ø	0,5 mm	0,5 mm
Max Pressure	7 bars	7 bars

8-Port Distribution Valve

	Ref. V-D-1-8-050-C-P	Ref. Ref. V-D-1-8-100-C-U
Number of stage	1	1
Number of ports	8	8
Wetted materials	PCTFE, PTFE	PCTFE, UHMW-PE
Internal volume	3,5 µL	18,1 µL
Carryover volume	2,6 µL	11 µL
Channel ø	0,5 mm	1 mm
Max Pressure	7 bars	7 bars

10-Port Distribution Valve

	Ref. V-D-1-10-050-C-U	Ref. V-D-1-10-100-C-U
Number of stage	1	1
Number of ports	10	10
Wetted materials	PCTFE, UHMW-PE	PCTFE, UHMW-PE
Internal volume	4,5 µL	18,1 µL
Carryover volume	2,8 µL	11 µL
Channel ø	0,5 mm	1 mm
Max Pressure	7 bars	7 bars

12-Port Distribution Valve

Laboratory Syringe Pump

Sequential Microdispenser

Electric Rotary Valve

Custom microfluidics