Microfluidic kits

These evaluation kits are composed of standard references only. If you need something more specific after your preliminary tests, please get in touch.

SKU: N/A Category:

Description

microfluidic-quick-start-kit

Quick start kit 1 – K100-6

  • 6 standard flat-bottom 1/4-28 UNF connectors
  • 6 ferrules
  • 1.5m PTFE tubing: 0.5 x 1.6 (=1/16′) mm
  • 1 setup guide

Quick start kit 2 – K100-12

  • 12 standard flat-bottom 1/4-28 UNF connectors
  • 12 ferrules
  • 1.5m PTFE tubing: 0.5 x 1.6 (=1/16′) mm
  • 1 setup guide

Our evaluation kits

The K200 evaluation kit has been picked specifically to allow you to test different valve designs for the various building blocs of your fluidics.

  • V-D-1-6-050-C-P allows you to test cross-contamination with a carryover volume as low as 1.5ul
  • V-D-1-10-100-C-U permits you to test bigger channels in the valve if you have issue with particles, precipitates or salt, or if you need a greater flow rate through the valve
  • V-S-1-4-050-C-P lets you test a different channel geometry on the rotor. It can be used either to combine 2 paths or simply as a 3-way valve
  • V-O-1-2-050-C-P enables you to use a simple on/off valve with the same technology as you will be using in the rest of your setup

The K201 evaluation kit has been picked specifically to allow you to evaluate whether the different rotor materials that we offer have an impact for your solution.

In general, a PTFE rotor has a greater biochemical compatibility but a shorter lifetime as a UHMPW-PE rotor. This can however depend on the specific liquids that you will be using in your setup.

Additional information

Select your kit

K200 evaluation kit – mix of various valve designs, K201 evaluation kit – different rotor materials, K100-6 Quick start kit 1, K100-12 Quick start kit 2

Valve specifications

 
V-D-1-6-050-C-P
10-ports-microfluidic-valve-3D
V-D-1-10-100-C-U
4-ports-microfluidic-switch-valve-3D
V-S-1-4-050-C-P
microfluidic-on-off-valve-one-stage
V-O-1-2-050-C-P
Distribution-valve-12-port-3D
V-D-1-12-050-C-U
Distribution-valve-12-port-3D
V-D-1-12-050-C-P
Number of stage111111
Number of ports610421212
Wetted materialsPCTFE,PTFEPCTFE, UHMW-PEPCTFE, PTFEPCTFE,PTFEPCTFE, UHMW-PEPCTFE, PTFE
Internal volume
(SPM/RVM)
3,5 µL18,1 µL2,5 μL3 μL4.5/3.4 μL4.5/3.4 µL
Carryover volume
(SPM/RVM)
2,6 µL11 µL0,6 μL-2.8/1.78 μL2.8/1.767 µL
Channel ø

0,5 mm1 mm0,5 mm0,5 mm0,5 mm0,5 mm
Max Pressure7 bars7 bars7 bars7 bars7 bars7 bars

Go to Top